SIZZLING SUMMER OFFERS
NEW HEATERS ADDED TO OUR RANGE
TITANIUM ELEMENTS available for all heaters.
Dates for your Diary.
Ladder Anodes now available.
Jobs in Devon.
Join us at Meddings Thermalec.

ANODES
A MUST FOR ANY SALT WATER POOL
As the trend for salt water pools using salt chlorination
increases, so does the realisation that there is a downside.
Salt Chlorinators can cause a number of problems including plaster discolouration, damage to heaters and black staining to metal ladders, lights etc. This is caused through “Galvanic Corrosion”.
The problem of galvanic corrosion can be easily stopped by using a sacrificial Zinc Anode, this simply allows the anode to erode before all other metals in the water.
Thermalec can provide you with the solution. Zinc anodes designed for the pool industry, to fit into new or existing pools.
HOW IT WORKS
The in-line zinc anode is attached to the bonding wire, thereby protecting all metal part (heaters, lights, rails, etc.) from galvanic corrosion. Zinc anodes will sacrifice themselves and corrode before all other metals in the pool. Zinc anodes need to be replaced approximately every 2-3 years.

REASONS FOR USING ZINC ANODES IN CHLORINE-GENERATED SALT WATER POOLS
REASONS FOR USING ZINC ANODES IN CHLORINE-GENERATED SALT WATER POOLS
Any time you have different metals (copper, stainless steel, etc.) in a salt water pool, you are creating a battery, because of this an amount of current flows between the metals. The electrons that make up the current within the pool are supplied by one of the metals, giving up bits of itself in the form of metal ions to the pool water. This is called galvanic corrosion. Galvanic corrosion causes plaster discoloration and metal erosion. The best way to inhibit the effect of galvanic corrosion is to use a zinc anode. Zinc is a metal that gives up its metal ions faster than other metals in the pool. In other words, the zinc anode will erode instead of other metals (pool light, rails, heater, light niche, ladder, etc.). The zinc ions will not discolour the pool plaster. The zinc anode should be replaced after half of it has eroded. This takes approximately 2/3 years.
A MUST FOR ANY SALT WATER POOL Thermalec have a range of Anodes specifically for the pool industry. They are designed for new installations and existing installation and can be fitted easily.
A MUST FOR ANY SALT WATER POOL
Thermalec have a range of Anodes specifically for the pool industry. They are designed for new installations and existing installation and can be fitted easily.

Retrofit Anode
T104-C
Retrofit Anode for existing pools
The T104-C inline zinc anode is designed with a copper bonding wire attached thereby rotecting
all metal parts against the effects of galvanic corrosion. The T104-C is available to fit 1/½” and 2” size pipes. The see through housing allows you to easily see when the anode has
depleted and needs to be replaced.
No re-plumbing required. A must for salt water pools.
Replacement Anode Kit
(No. T104-R)

New Pool Installation
T104-D
Designed for new installations
but can be easily fitted to existing installation, standard pipe fitting 2” can be reduced to fit 50mm or 1½” pipe.The T104-D helps protect heaters, pool lights and rails from damage due to galvanic corrosion. Inline zinc anode for new installations - 4 feet of #8 copper bonding wire included. Replacement Anode Kit (No. T104-R)

Any Tee Anode
T104-D Spigot
The T104-D Spigot is designed to fit into any 2” Tee connector. The inline zinc anode is attached to the copper bonding wire thereby protecting all metal parts against the effects of galvanic corrosion. The see through
housing allows the anode to be
easily replaced when depleted.

Ladder Anode
T104-B
Ladder Anodes now available.
Simply attach the Anode to your pool rail or ladder under the water line

Replacement Anode
T104-R